Macbook pro: Retina display

15.4-inch (diagonal) LED-backlit display with IPS technology; 2880x1800 native resolution at 220 pixels per inch with support for millions of colours

Supported scaled resolutions:

• 1920x1200
• 1680x1050
• 1280x800
• 1024x640

500 nits brightness Wide colour (P3)

• Intel Mac Pro 2.66 GHz QUAD core with 64Gb RAM
• Intel Mac Book Pro i5 2.66 GHz QUAD core with 16Gb RAM
• Pro Tools 10• Logic Pro X

Dual Diaphrgm Condenser Mircophones B-2 PRO & C-3 Behringer

• Microphone Type: Condenser
• Polar Pattern: Cardioid, Omni, Figure-8
• Diaphragm Size: 1" (25.4mm)
• Frequency Response: 20Hz-20kHz
• Max SPL: 138dB
• Output Impedance: 100 ohms
• Signal to Noise Ratio: 77dB (A weighted)
• Self Noise: 17dB (A weighted)
• Low Cut Filter: 150Hz (-6dB/octave)
• Pads: -10dB
• Connector: XLR
• Weight: 1.2 lbs.
• Included Accessories: Shock Mount, Windscreen, Aluminum Carry Case Manufacturer Part Number: B2PRO

Xenyxx 1222usb-bus mixer wim enyx mic preamps compressor

• Premium ultra-low noise, high headroom analog mixer
• 4 state-of-the-art, phantom-powered XENYX Mic Preamps comparable to stand-alone boutique preamps
• 4 studio-grade compressors with super-easy "one-knob" functionality and control LED for professional vocal and instrumental sound
• Neo-classic "British" 3-band EQs for warm and musical sound
• New studio-grade FX processor with 16 editable presets including reverb, chorus, flanger, delay, pitch shifter, multi-effects, Tap function and storable user parameter settings
• 7-band stereo graphic EQ allows precise frequency correction of monitor or main mixes
• 324-bit multi fx processor and USB/Audio interface

M-Adios Bx8 carbon

• Type: 2-way near-field studio reference monitors
• LF Driver: 8-inch (203 mm) Kevlar curved cone with high temperature voicecoil and damped rubber surround, magnetically shielded
• HF Driver: 1.25-inch (32mm) magnetically shielded natural silk dome
• Frequency Response: 38 Hz – 22 kHz
• Crossover Frequency: 2.2 kHz
• LF Amplifier: Power 70 W
• HF Amplifier: Power 60 W
• Signal-to-Noise Ratio: > 100 dB typical A-weighted
• Input Connectors:
• 1 x XLR balanced input connector
• 1 x TRS balanced/unbalanced input connector
• Polarity: Positive signal at + input produce outward LF cone displacement
• Input Impedance: 20 K? balanced, 10 K? unbalanced
• Input Sensitivity: 85 mV pink noise input produces 90 dBA output SPL at 1 meterwith volume control at maximum
• Protection: RF interference, output current limiting, over temperature, turnon/off transient, subsonic filter, external mains fuse.
• Indicator: Power on/off indicator on rear panel
• Power Requirements: Factory-programmed for 115 V ~50/60 Hz, 230 V ~50/60 Hz, or100 V ~50/60 Hz
• Cabinet: Vinyl-laminated high-acoustic-efficiency MDF

M- Audio A v 42: Multi media Monitor speakers

• Type: Two-way desktop reference speaker
• Low-Frequency Driver: 4" diameter, polypropylene-coated, with high-temperature voice coil
• High-Frequency Driver: 1" diameter, silk cone tweeter
• Frequency Response: 75 Hz – 20 kHz
• Crossover Frequency: 2.7 kHz
• RMS SPL: 101.5 dB @ 1 me
• Signal-To-Noise Ratio: > 90 dB (typical, A-weighted)
• Input Connectors: Left and right RCA line input, and 1/8" aux input
• Polarity: Positive signal at "+" input produces outward low-frequency cone displacement
• Dynamic Power: 20 watts continuous, per channel into 4 ?
• Input Impedance: 10 k ? unbalanced
• Input Sensitivity: 100 mV pink noise input produces 90 dBA output SPL at 1 meter with volume control at maximum
• Protection: RF interference, output current limiting, over temperature, turn on/off transient, subsonic filter
• Indicator: blue power LED for aligning wave guide
• Power Requirements: 100-120V/~50/60 Hz, 220-240V/~50/60 Hz; powered via detachable 2-conductor line cord
• Cabinet: Vinyl-laminated MDF
• Dimensions: 8.4" x 5.7" x 7.4 (21.3 cm x 14.6 cm x 18.8 cm)
• Weight: 7.6 lbs (3.43 kg)

Amp: 4-ch headphone: behringer

• High headroom with extended frequency response
• 4 independent stereo amplifier sections
• Dual stereo balanced inputs with separate level and balance controls
• Accepts balanced or unbalanced inputs from professional consoles and monitor mixers or consumer CD's, MiniDiscs and other unbalanced sources
• Simplified level makeup on output for 6dB unbalanced signal level decrease
• Accepts balanced or unbalanced inputs from professional consoles and monitor mixers or consumer CD's, MiniDiscs and other unbalanced sources
• 6-segment LED metering for main input and individual output sta
• Dual headphone outputs per channel for 8 total headphone outputs
• Individual channel level control and input selection switching
• Parallel Link Output for multi-unit cascading

Popfilters

• 6" double-layered, split-level "Pop" Filter
• Nylon 6" screen pop filter
• 11.5" goose neck and clamp included
• C-clamp will fit most standard microphone stand and shafts and booms

Reflection filters

• Compact solution for providing sound isolation for vocal or voice over recording in untreated spaces
• High-density foam absorbs acoustic reflections and minimizes room ambience, isolating the microphone
• Perforated aluminum shield diffuses and prevents sound that might reflect back to microphone, especially when recording loud vocalists
• Sliding bracket makes it easy to mount the microphone in the ideal position inside the reflection filter
• Rear adjustable bracket provides additional filter height adjustment to accommodate different vocalist heights
• Adapters with industry-standard 5/8"-27 threaded studs and sockets are compatible with mic stands, shock mounts, and mic clips with a 5/8"-27 post.
• Deep, semi-circular design ensures dry vocals while attenuating external noise

Guitar amps, bass amps and drumkits

• Shure Microphones
• Kustom KG 100FX
• Marshall MG100HCFX Half-Stack
• Fender Rumble 100
• DAVOS Pro Audio PMX-801BT
• BMG Loudspeakers Type 15"
• KRK ROKIT 10-3 G3 10"